Basic Info.
Structure
Vertical and Horizontal Composite
Plastic Type
Thermoplastic
Plasticizing Way
Screw Type
Clamping Way
Hydraulic & Mechanical
Computerized
Computerized
Certification
CE, ISO9001:2008
Product Description
1. Stable Injection Device
A PID temperature control, precise temperature control of barrel.
There are three or four screws and barrels with optimal design
Respectively, nitride, hard plating, dual-metal, which is suitable for different processes of a variety of plastics and the choice of product.
Two-guided direct line guided bar supports, double-balanced rapid injection.
The high-torque hydraulic motors offer a stable plasticizing capacity, high-precision electronic device position detection enable accurate measurement.
Multi-injection speed and pressure and multi-level holding pressure settings, switch from the injection time, location, pressure control to ensure the quality of molding.
Multi-level back-pressure of pre-plastic and pre-speed are computer-controlled, anti-drooling and automated auto purge,
Expected to prevent cold-start function to ensure that the screw, barrel will not be harmed.
2. Stable And Reliable Clamping Unit
Five-point double toggle diagonal structure, template design by computer optimization.
Mechanism, electronic & hydraulic triple interlock safety protection function.
Sensitive low-voltage mold protection device.
Multiple hydraulic liftout type
Multiple stages control for mold opening clamping pressure, speed positioning control
Hydraulic motor-driving gear mold adjustment.
Special technique treatment, reliable strength
Automatic centralized lubrication system
Mold open and clamping, liftout position control
Automatic mould adjustment function
Robotic pincher mechanical installation positioning interface.
Core pulling and inserting system is suitable for the complicate structure mould.
3. Fast Response, Stable Output
The manual plug value hydraulic system make the machine having quick and smooth motion response
Pressure and flow double proportional value control
Hydraulic oil cooling device
High-performance imported hydraulic unit with optimizing allocation
The fuel tank has a big opening hole so can be cleaned easily.
4. Quick Reaction Stability System
Special control the computer for plastic injection machine use, control and display relatively independent with high reliability.
Technical parameters pre-setting and storage function
Parameters information protection function
Charging barrel temperature deviation automatic adjustment function
Abnormal alarm function
Front and back door emergency stop button
Real-time monitoring can display the condition of each motion
Electrical motor safety protection device
Robotic pincher interface
Cutting photoelectric switch
System hardware I/O detection function
Charging barrel temperature is controlled accurately by computer setting and PID closed-loop manner.
Screen protection function , prolong the life of screen using.
Full-enclosed electrical-controlled box, electrical components are neatly arranged, never interfere with each other.tandard Features |
Double-cylinder balance injection system |
Multi-stage pressure&speed injection |
Back pressure adjustment device |
Low pressure mold protevtion |
Multipe hydraulic ejector knock-out |
Mechanical electrical safety device |
Auto lubrication system |
Hydraulic pressure full proportional control |
Computer control system |
Molding data memory system |
Oil temperature controller |
Hopper magner |
Optional Features |
Double hydraulic pulling and inserting |
Air blowDV |
Hydraulic unscrew device |
Hydraulic safety device |
High speed clamping |
Linear guide |
Standard Accessory |
Anti-vibrating pad |
Spare parts kit |
Tool box |
Iubrication oil |
Optional Accessory |
Robotic pincher |
Hopper dryer |
Auto loader |
Mold clamps |
Water chiller |
Plastic dehumidizer |
Mold temperature controller |
Oilbypass filter |
Plastic granulator |
Plastic color-mixer |
Inverter |
Machine model | | KSML1500 |
Specification | | A | B | C | D |
INJECTION UNIT | Unit | | | | |
Screw diameter | mm | 110 | 120 | 130 | 140 |
Screw L/D ratio | L/D | 25.7 | 24 | 22 | 20 |
Shot volume(therretical) | cm3 | 6271 | 7463 | 8759 | 10158 |
Injection weight(ps) | g | 5707 | 6791 | 7971 | 9244 |
Injection rate | g/s | 815 | 970 | 1138 | 1320 |
Injection pressure | MPa | 208 | 175 | 150 | 129 |
Screw speed | rpm | 90 |
CLAMPING UNIT | | | | | |
Clamping force | KN | 15000 |
Open stroke | mm | 1350 |
Space between tie bars(W×H) | mm | 1310×1300 |
Max.Mould height | mm | 1400 |
Min.Mould height | mm | 600 |
Ejector stroke | mm | 360 |
Ejector force | KN | 260 |
Others | | | | | |
Max.pump pressure | MPa | 16 |
Pump motor power | KW | 55+55 |
Heating power | KW | 86 |
Numbers of heating area | segment | 8+1 |
Machine dimension(L×W×H) | m | 15.2×3.0×4.1 |
Oiltank cubage | L | 2900 |
Machine weight | t | 90 |
Standard Features |
Double-cylinder balance injection system |
Multi-stage pressure&speed injection |
Back pressure adjustment device |
Low pressure mold protevtion |
Multipe hydraulic ejector knock-out |
Mechanical electrical safety device |
Auto lubrication system |
Hydraulic pressure full proportional control |
Computer control system |
Molding data memory system |
Oil temperature controller |
Hopper magner |
Optional Features |
Double hydraulic pulling and inserting |
Air blowDV |
Hydraulic unscrew device |
Hydraulic safety device |
High speed clamping |
Linear guide |
Standard Accessory |
Anti-vibrating pad |
Spare parts kit |
Tool box |
Iubrication oil |
Optional Accessory |
Robotic pincher |
Hopper dryer |
Auto loader |
Mold clamps |
Water chiller |
Plastic dehumidizer |
Mold temperature controller |
Oilbypass filter |
Plastic granulator |
Plastic color-mixer |
Inverter |
Address:
831/8f, 95 Business Mansion, No. 598 Jiangnan Road, Jiangdong, Ningbo, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Packaging & Printing, Service
Company Introduction:
We, Ningbo Hautek Industries Co., Ltd., based on more than 15 years of professional machinery exporting experience, with rich knowledge of beverage project, bottling technology and bottle making machinery, HAUTEK focuses on high and middle level international market, major in beverage production line design and manufacturing, also supply relative assorted equipment. Supported by strong technical team, we offer high quality machine, good service to customers and give prompt response. We have had success in exporting and installation many beverage production lines abroad.
We manufacture and supply:
*Water treatment unit, and RO system
*Water treatment equipment and filling line
*Carbonated beverage equipment and filling line
*Juice (and tea) beverage production line and filling line
We also design and supply for:
*PET preform production line, including injection molding machine, preform mold, and auxiliary equipment.
*PET bottle blowing line, including blow molding machine, blowing mold and auxiliary equipment.
*Plastic molds etc.